ISO Certified

Fasteners for Power Storage

Reliable, application‑specific fasteners for battery energy storage, grid power, and data center infrastructure—supported by ISO‑certified quality and Vendor Managed Inventory programs.

As an ISO-certified fastener supplier, we deliver engineered fastening solutions trusted by leading steel stampers across North America.

Companies building battery energy storage systems, power conversion skids, and data center infrastructure all rely on a common family of high‑strength fasteners to keep critical equipment running safely and efficiently. Blue Chip Engineered Products supplies these fasteners with the engineering support, inventory programs, and packaging services needed to simplify your supply chain and keep projects on schedule.

Engineered for power storage environments
Battery storage racking, inverters, switchgear, and power distribution frames see vibration, thermal cycling, and demanding electrical requirements. We help you select fasteners that maintain clamp load over the life of the system, resist corrosion in indoor and outdoor environments, and support grounding and conductivity where required.

Typical applications include:

Battery energy storage racks and modular skids
Power conversion cabinets, inverters, and switchgear enclosures
Grid‑tie cabinets, bus structures, and auxiliary equipment frames
Data center racks, power distribution units, and cooling equipment mounts

Materials, coatings, and performance

Across power storage and related infrastructure, performance depends on choosing the right material and finish for each environment. We supply carbon steel in common structural grades, stainless steels for corrosive or clean‑room adjacent areas, and specialty alloys for high‑temperature zones in generation equipment.

Coating options include hot‑dip galvanizing and zinc‑flake systems for outdoor structures, plus zinc and organic finishes for indoor racks and cabinets. Where vibration and serviceability are critical, we can recommend prevailing‑torque nuts, lock washers, wedge‑locking washers, lockbolts, and pre‑applied threadlocking solutions

Base materials
- Carbon steel (Grades 5/8; ISO 8.8/10.9/12.9) for high‑strength structural joints.
- Stainless steels (304, 316) for outdoor, corrosive, or clean‑room‑adjacent data center uses.
- Specialty high‑temp/corrosion alloys in select power‑gen locations (Inconel, Incoloy, Hastelloy, A286, titanium).
Coatings and finishes
- Hot‑dip galvanizing and zinc flake for outdoor and grid applications.
- Zinc plating and organic coatings for indoor racks, cabinets, and data centers.
Function‑critical features
- Vibration resistance: prevailing‑torque nuts, lock washers, wedge‑locking washers, lockbolts, and pre‑applied thread‑lockers.
- Electrical requirements: conductive finishes for grounding points; sometimes avoidance of certain coatings in contact with copper or aluminum bus.
- Reusability and service: rivet nuts and threaded inserts where frequent assembly/disassembly is expected.

Copper Hardware

Copper and copper-alloy hardware for busbars, lugs, and high-current joints in battery racks, inverters, switchgear, and power distribution. We help you match bolt grade, washer stack, plating, and anti-loosening features so contact pressure stays stable through thermal cycling and service.

Typical products include:

Copper and tin-plated copper bolts, nuts, washers, and busbar joint hardware
Belleville and flat washer stacks that spread clamp load across the contact area
Stainless or high-strength steel bolts where the fastener clamps the joint and the copper carries the current
Threaded studs, spacers, and standoffs for bus supports and insulator mounts
Grounding lugs, clamps, and termination hardware for copper and aluminum conductors

Support for OEMs and installers

Blue Chip supports both OEMs building racking, cabinets, skids, and power modules, and contractors who assemble and install these systems in the field. We can help standardize hardware across product platforms, consolidate SKUs, and build kits that simplify installation at the job site.

Examples include:

Structural bolt‑nut‑washer kits for rack frames and platforms
Rivet nut plus mating bolt packages for panel and channel assemblies
Anchor and threaded‑rod bundles for equipment bases and cable supports
Panel hardware assortments for doors, access panels, and cable management

Lifting Hardware

Rated lifting points for battery modules, cabinets, rack frames, and equipment skids. We supply eye bolts, hoist rings, and related hardware so lifts stay within the rated working load and the attachment matches the frame or enclosure.

Typical products include:

Forged eye bolts and swivel hoist rings with published working load limits
Lifting eyes, pad eyes, and threaded lifting inserts for cabinets and skid frames
Shoulder eye bolts and machinery eye bolts for angled lifts where the design allows
Matching nuts, washers, and thread engagement hardware for the specified hole and material thickness
Kit-ready lift-point sets labeled by assembly, rated capacity, and install location

Kitting and Packaging Solutions

Implementing our Solve. Source. Schedule. Service. approach to Vendor Managed Inventory, we help power storage and data center customers eliminate waste, avoid stock‑outs, and reduce labor tied up in fastener management. Using electronic scales, RFID, and wireless data capture, our VMI programs monitor consumption and trigger replenishment so the right hardware is always on hand.

With automated kitting and packaging, we can supply single‑part or multi‑part hardware kits labeled with your part number, logo, barcodes, or data matrix codes to drop directly into your production or installation process. This reduces picking errors, streamlines assembly, and shortens time from rack delivery to energized system

Rack & Structural Frame Fasteners

o Hex bolts as primary load‑bearing fasteners for racks, support steel, and heavy equipment skids.

o Carriage bolts where snag‑free, smooth heads are needed to protect cables and give a clean aesthetic.

o Machine bolts and machine screws for precise equipment mounting and alignment in power distribution units, servers, and switchgear.

o Threaded rod and hanger systems (with nuts, washers, beam clamps) for cable trays, overhead busway, and HVAC support.

blind and structural rivets -fasteners for power systems_Blue Chip Engineered Products

grounding fasteners-fasteners for power systems_Blue Chip Engineered Products

copper -fasteners for power systems_Blue Chip Engineered Products

clips and clamps-fasteners for power systems_Blue Chip Engineered Products

lifting hardware-fasteners for power systems_Blue Chip Engineered Products

push fit-fasteners for power systems_Blue Chip Engineered Products

wire management-fasteners for power systems_Blue Chip Engineered Products

From Print to Part—Your Custom Fastener Partner

Whether you are launching a new battery storage platform or standardizing hardware across multiple power modules, our team can engage early in the design process. From reviewing drawings and specifications to recommending alternate materials and manufacturing processes, we focus on delivering economical, production‑ready fastener solutions that meet your performance and timeline requirements

Fasteners for Power Storage

Visit us at Booth #C2720